Drive Set KLE 8 80x80

Drive Set KLE 8 80x80


View CAD-Data Assign to comparison list Compare products
Special features:
item products are based on different modular dimensions and their associated system grooves. Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners. The profiles in Line X feature a Line 8 system groove but have a particularly flat surface with minimum curve radii that make them ideal for building sealed constructions.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium. EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components. These include batteries, etc.
All substances are registered according to the REACH regulation. REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that users have accurate information on the type and properties of operating materials, lubricants, etc. that they might come into contact with.
Delivery unit
Scale limit
1 set
on application

on application

More Product Information

  • Attributes
  • Details
  • Downloads
  • Application
  • Classification
Drive Set KLE 8 80x80


line 8
Delivery Unit
1 set
. = 1
m = 1.7 kg
Drive Set KLE 8 80x80


Coupling Housing KLE 8 80x80, Al
Adapter Plate  KLE 8 80x80, Al
Coupling Half D55/D8, Al - reborable up to ø28mm
Coupling Half D55 KLE 8 80x80 Al
Coupling Insert D55, PU, green
Centring Piece D55 KLE 8 80x80, St
4 Hexagon Socket Head Cap Screws DIN 912 M6x25, St, bright zinc-plated
4 Hexagon Socket Head Cap Screws DIN 912 M6x85, St, bright zinc-plated
Hexagon Socket Head Cap Screw DIN 912 M8x25, St, bright zinc-plated
Tightening torque, Coupling Half D55 KLE 8 80x80 Al: 25 Nm
Tightening torque, clamping hub screw: 9.6 Nm
The relevant Drive Set is attached to the Drive Unit for driving a KLE. This Drive Set consists of a Coupling Half for connection to the pulley, a Coupling Half for connection to the motor shaft, a Coupling Housing with Adapter Plate for connecting the motor to the housing of the Drive Unit, a Centring Piece and fasteners.
The prepared Coupling Half and the hub of the pulley are mechanically interlocked and bolted together. The elastic Coupling Insert transmits the drive torque free of play.
Transmission ratios of Drive Units KLE
The effective radius of the pulleys is
KLE 6 60x60: rW = 24.5 mm
KLE 8 80x80: rW = 33.5 mm
The Drive Set is designed so that the interface may be easily machined to suit the motor being attached:
- The universal Coupling Half bore is easily machined to accommodate the motor shafts. Parallel keyways or similar can be added if necessary.
- The Adapter Plate can be machined to suit the motor plate. Consequently, virtually any motor can be used for driving a KLE.
The Centring Piece supplied must always be fitted between the housing parts to prevent alignment errors during assembly.
The permissible drive torques for the Drive Units and coupling must be taken into account when specifying the motor. To increase the rigidity of the drive connection, it may be necessary to use a profile construction to support the motor.
The hubs of the Couplings Halves can be bored up to the diameter of the motor/gearbox shafts. For higher drive torques, a key to DIN 6885 T1 is recommended.
Simplified method for determining the maximum permissible load for the drive elements of a KLE:


Assembly instruction(3 MB)


Space-saving positioning system - Article EX-01008

This two-axis positioning system takes up very little space.

More information
PDF CAD Parts list


Machine frame with 3-axis handling - Article EX-01072

This stable machine frame is held together by Angle Brackets and stands firm even when subjected to frequent and rapid movements in three spatial directions.

More information
PDF CAD Parts list Drawing


3-axis handling - Article EX-01078

item linear technology can be used to design highly accurate 3-axis handling systems. Movement along the X axis is controlled by two synchronised KLE 8. Movement along the Y axis is controlled by roller guide 8 D10 with timing-belt drive, while roller guide 8 D14 with timing-belt drive takes care of the Z axis.

More information
PDF CAD Parts list Drawing
Drive Set KLE 8 80x80


Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0.1
eCl@ss 7.1
eCl@ss 8.0
customs tariff number

Project enquiry

We help you plan your projects.
Customised and highly efficient.

Inquire now


Customised, simple and
convenient online planning.

Configure now