item
Timing-Belt Reverse Unit

Timing-Belt Reverse Unit


Show all 13 variants
On request

Technical Data

item products are based on different modular dimensions and their associated system grooves.Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.The profiles in Line X feature a Line 8 system groove but have a particularly flat surface withminimum curve radii that make them ideal for building sealed constructions.All substances are registered according to the REACH regulation.REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that usershave accurate information on the type and properties of operating materials, lubricants, etc.that they might come into contact with.Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.These include batteries, etc.

Scope of Delivery

Timing-Belt Reverse Unit, Al, black
Ball-bearing timing pulley with multi-spline hub, Hub geometry VK32 for Multi-Spline Shaft VK32 DIN ISO 14 - 6x26x32, hub depth 75 mm
One revolution corresponds to 280 mm, effective radius rw = 44.6 mm
Frictional moment with 1‰ pre-tensioning of the Timing Belt: MR = 1.05 Nm
Max. load: MD = 92 Nm
Timing Belt length in the Timing-Belt Reverse Unit for
90° reversal: 220 mm
180° reversal: 300 mm
Pitch p = 10 mm     Number of teeth z = 28

Properties

Article number 0.0.426.19
Line line 8
Torque max. Mmax. = 100 Nm
ESD ESD-safe = No
Weight m = 3,9 kg
Delivery unit 1 pce.

Description

Timing-Belt Reverse Unit 8 80 R50 II is a particularly compact Timing-Belt Reverse Unit for driving Timing Belt R50 T10. It is fastened to the core bores of Profiles 8 (cross-sections of 80x80 mm and above).
The timing pulley of Timing-Belt Reverse Unit 8 80 R50 II VK32 features a multi-spline hub for accommodating Multi-Spline Shaft VK32.
The housing allows connection of coupling D80 VK32.
The hub of the version with the bore can be machined to a maximum diameter of ⌀ 36 mm or diameter ⌀ 30 mm with key.
Connection of Timing-Belt Reverse Unit 8 80 R50 II based on a profile height of 120 mm (return of the Timing Belt in the profile cavity) or a profile height of 80 mm with Standard-Fastening Sets 8. To do this, the Timing-Belt Reverse Unit is partially dismantled, secured to the profile and then refitted.
The emergence dimension of the Timing Belt is 80 mm.
90° reversal of Timing Belt R50 T10.
The opening for the Timing Belt is marked out on the inside and must be removed from the cap.
If for design reasons the Timing-Belt Reverse Unit is fitted without a cap, the length of the Timing Belt in the Reverse Unit reduces by 10 mm.
The profiles must be rounded where they join the Reverse Unit in order to protect the Timing Belt.
To protect the Timing Belt against damage, the profiles must be rounded at the joint to the Timing-Belt Reverse Unit.

Variants

Sort by

Line:  5 Diameter of timing pulley:  40 mm Timing Belt width:  10 mm Drive type:  spline shaft VK14
Line:  5 Diameter of timing pulley:  40 mm Timing Belt width:  10 mm Drive type:  Hole ø 8H7, reborable
Line:  5 Diameter of timing pulley:  40 mm Timing Belt width:  10 mm Drive type:  expanding hub coupling D12
Line:  8 Diameter of timing pulley:  40 mm Timing Belt width:  25 mm Drive type:  spline shaft VK14
Line:  8 Diameter of timing pulley:  40 mm Timing Belt width:  25 mm Drive type:  Hole ø 8H7, reborable
Line:  8 Diameter of timing pulley:  40 mm Timing Belt width:  25 mm Drive type:  expanding hub coupling D15
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  25 mm Drive type:  spline shaft VK14
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  25 mm Drive type:  spline shaft VK32
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  25 mm Drive type:  Hole ø 11H7, reborable
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  25 mm Drive type:  expanding hub coupling D34
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  50 mm Drive type:  spline shaft VK32
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  50 mm Drive type:  Hole ø 8H7, reborable
Line:  8 Diameter of timing pulley:  80 mm Timing Belt width:  50 mm Drive type:  expanding hub coupling D34

Downloads

Accessoires

Applications

Classification

Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 8.0
23170208
eCl@ss 7.1
23170208
eCl@ss 11.0
23170208
eCl@ss 4.0
23170301
eCl@ss 4.1
23170301
eCl@ss 5.0
23170210
eCl@ss 5.1
23170210
eCl@ss 6.0.1
23170210
UNSPSC 9.0
26111504
UNSPSC 7.0
26111504
Customs tariff number
84879090