• |
  • |
  • |
  • |
Compare Products0
Last visited

Mitre-Butt-Fastening Set 6

Art. No.: 0.0.606.47
Mitre-Butt-Fastening Set 6
Mitre-Butt-Fastening Set 6
Mitre-Butt-Fastening Set 6
Mitre-Butt-Fastening Set 6
Special features:
Clamping pin M5x29, St, bright zinc-plated
Sleeve with bore, St, bright zinc-plated
Threaded sleeve, St, bright zinc-plated
Grub screw M6, St, bright zinc-plated
Grub screw DIN 915-M6x10, St, bright zinc-plated
Properties
Line   = line 6
Delivery Unit   = 1 set
Weight m = 20 g
Description Date Filesize
Enquiry form
26.10.2016 0 MB
Log in
Assembly instruction
16.10.2012 1 MB
Log in
Image Description Files
Sliding protective hood - Article EX-01025A visually stunning highlight with extremely practical functions.

read more


Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 4.0 22041424
eCl@ss 4.1 22041424
eCl@ss 5.0 23250311
eCl@ss 5.1 23250311
eCl@ss 6.0.1 23250311
eCl@ss 7.1 23360290
UNSPSC 7.0 31162503
UNSPSC 9.0 31162503
customs tariff number 83024200


Fasten together mitre-cut profiles with ease. Ideal for protective hoods, partitions and enclosures.
Using Mitre-Butt-Fastening Set 6:
1. Mitre-cut profile at angle γ.
2. Drill counterbores (⌀ 9.1 mm, depth 21 mm) for the fastener sleeves into the side of each profile (use of drilling jig 0.0.616.77 recommended). See Mitre-Fastening Set 6 for dimensions.
3. Drill a hole (⌀ 5.5 mm) into the mitred face of both profiles (use of drilling jig 0.0.616.89 recommended). Minimum hole depth: 15 mm.
4. Insert the fastener sleeve with lateral thread into the counterbore of one of the profiles and screw in the clamping pin until the perimeter mark is level with the cut profile edge.
5. Use grub screw DIN 915 to tighten the clamping pin in the fastener sleeve with thread (M = 3.5 Nm).
6. Insert the fastener sleeve with bore into the second profile, and fit the assembly over the clamping pin.
7. Drive grub screw M6 into the fastener sleeve and tighten the profile fastening (M = 3.5 Nm).
Your item dealer can provide the required mitre cuts and profile processing as a service.